Hampton Bay HD494768 Installationsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS

Item#23061, 23062, 23063 (New. 05/12/2010)

READ AND SAVE THESE INSTRUCTIONS

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

Fig. 1

Fig. 2

Fig. 3

PREPARATION (Fig.1)

1. Shut off the power at the circuit breaker and remove

old fixture, including the mounting hardware.

2. Carefully unpack your new fixture and lay out all the

parts on a clear area. Take care not to lose any

small parts necessary for installation.

3. Attach the Crossbar (B) to the Junction box (A) with

Screws (C). The side of the Back Plate marked

“GND” must face out.

4. Thread the Nipple (D) part way into the center hole

of the Crossbar (B).

CONNECTING THE WIRES (Fig. 2)

5. Connect the electrical wires as shown in Fig. 2,

making sure that all wire connectors are secured. If

your outlet box has a ground wire (green or bare

copper), connect the fixture’s Ground Wire to it.

Otherwise, connect the fixture’s Ground Wire directly

to the mounting plate using the Green Screw

provided. After the wires are connected carefully

tuck them inside the Junction box.

COMPLETING THE INSTALLATION

6. Place the Back Plate of Fixture Body (E) over the

Nipple (D) and secure it tightly using Cap Nut (F).

7. To prevent moisture from entering the outlet box and

causing a short, use clear caulking (i.e.

Indoor/Outdoor Silicone Sealant) to outline the

outside of fixture back-plate where it meets the wall

leaving a space at bottom to allow moisture a means

to escape (Fig.3).

8. Install light bulbs (not included) in accordance with

fixture specifications. (DO NOT EXCEED THE

MAXIMUM WATTAGE RATING!)

Your installation is now complete. Return power to

the junction box and test the fixture.

Note: Illustration (Fig. 1) on this manual is for

installation purposes only. It may or may not be

identical to the fixture purchased.

LA-1768E/S

FIXTURE

WIRES

Black or

Smooth

USE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

USE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

USE

WIRES

Green

(Ground)

In the event that you should have any installation

question or are missing parts, please contact Custome

Service. Customer service may be reached weekdays a

1-877-527-0313 between the hours of 8:00am and

5:00pm PST (Pacific Standard Time).

BACKPLATE

CAULKING

INSTALLATION INSTRUCTIONS 1

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Item#23061, 23062, 23063 (New. 05/12/2010) READ AND SAVE THESE INSTRUCTIONS WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BRE

Kommentare zu diesen Handbüchern

Keine Kommentare

Hampton Bay HD494768 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein Hampton Bay HD494768 herunter. Hampton Bay HD494768 Installation Guide Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Hampton Bay HD494768