Hampton Bay EC8070NM Gebrauchs- und Pflegehandbuch Seite 2

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 12
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 1
2
Thank you for purchasing this Hampton Bay Semi-Flush. This product has been manufactured with the highest
standards of safety and quality.
FEATURES:
1. The Faux Alabaster Glass Semi-Flush in NM finish. This Semi-Flush is available online at
www.homedepot.com or through special order at your local Home Depot store.
2. This fixture has been engineered to safely use up to Two 100 watt MAX, incandescent light bulbs.
3. Can be used with any standard 120 volt incandescent style dimmer switch (not included).
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service Team at 1-877-527-0313 or visit
www.homedepot.com. Please reference your SKU 555-004 or UPC008938280730.
CAUTION:
1. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off
the circuit breaker or by removing the fuse at the fuse box.
2. Refer to the re-lamping label near the lamp holder for recommended wattage.
3. Release the glass gently after tightening the wires with the decorative screw nuts to avoid breakage.
4. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.
5. If you have any non-electrical questions about this fixture, please contact our Customer Service team at 1-877-
527-0313 or visit www.homedepot.com. Please reference your SKU 555-004 or UPC008938280730.
6. Keep your receipt as proof of purchase.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION (not included):
Bulbs Safety Goggles Ladder Pliers Wire Strippers Flathead Phillips Electrical tape
Cutters Screwdriver Screwdriver
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
Glass shade (# 5) Fixture Body (# 1) Ball Nut (# 4) Support Stem (# 2)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture.
2. Lay out all parts on a clean surface.
3. Put the threaded end of hanging tube (#2), through the fixture (#1) and then through the glass shade
(#5).Use the spherical nut (#4) to lock them in place.
4. Install two 100 watt light bulbs (#3) into the lamp sockets.
ASSEMBLY:
# Part Description
1 Fixture Body
2 Support Stem
3 Bulb
4 Round Nut
5 Glass Shade
5
4
1
2
3
Seitenansicht 1
1 2 3 4 5 6 7 ... 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare