Hampton Bay 51564 Gebrauchs- und Pflegehandbuch PDF herunterladen (Seite 12)

Assembly - Attaching the Fan Blades

Attaching the blades to the blade

brackets

□ Mount the fan blade (F) to the blade bracket (G) by aligning the

three key-slot holes in the blade (F) with the three posts on the

top of the blade bracket (G).

□ Hold the blade (F) with both hands close to the blade bracket

(G) down rmly. Ensure the key-slot holes are properly seated

on the blade bracket (G) posts.

□ While still holding the blade (F) down with both hands, rmly

slide the blade (F) until it engages in the locking mechanism

(UU). Make sure the locking mechanism (UU) at the rear of the

blade bracket (G) springs upward and butts against the edge of

the blade (F), indicating a secure connection.

□ Visually inspect the top of the blade bracket (G) to ensure the

locking mechanism is securely in place.

□ Repeat this procedure for the remaining blades (F).

Assembly - Attaching the Lights

Attaching the light kit tter assembly

□ Remove the three screws (V V) on the switch cup cover of the

light kit tter assembly (E).

□ Connect the wires from the light kit tter assembly (E) to the

wires from the switch cup of the fan-motor assembly (D) by

connecting the molded adaptor plugs together (blue to black,

white to white). Carefully tuck all wires and splices into the

switch cup.

□ Align the three holes in the switch cup cover of the light kit

tter assembly (E) with the three holes in the switch cup

of the fan-motor assembly (D). Make sure the notch in the

switch cup cover of the light kit tter assembly (E) clears the

reversing switch in the switch cup of the fan-motor assembly

(D). Position the light kit tter assembly (E) and re-install the

three screws (V V) that were removed in rst step to secure

the light kit tter assembly (E).

CAUTION: To reduce the risk of electric shock, disconnect

the electrical supply circuit to the fan before installing the

light xture.

NOTE: Notice the location of the fan’s slide switch. This is

the switch used to change the fan’s directional rotation.

For more information on the operation of this switch, see

Operating Your Fan on page 14.

V V

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Keine Kommentare

Hampton Bay 51564 Gebrauchs- und Pflegehandbuch Seite 12