Hampton Bay 51564 Gebrauchs- und Pflegehandbuch PDF herunterladen (Seite 9)

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly - Hanging the Fan

Hanging the fan

Close to ceiling mount

Standard mount

□ Carefully lift the fan-motor assembly (D) up to the slide-on

mounting bracket (A).

□ Insert the ball portion of the ball/downrod assembly into the

socket of the slide-on mounting bracket.

□ Turn the ball/downrod assembly clockwise until it is seated

with the tab of the slide-on mounting bracket aligned with the

slot in the ball.

□ If using close-to-ceiling mounting, hang the fan on the hook

provided by utilizing one of the round holes at the outer rim of

the ceiling canopy (C).

WARNING: The hook (MM) is only to balance the fan while

making the electrical connections. Failure to hang as shown

may result in the hook (MM) breaking, causing the fan to

fall. The hook must pass from the inside to the outside of the

canopy.

WARNING: When hanging the fan on the hook (MM) it is

critical that you use one of the non-slotted (round) holes in

the canopy (C).

Assembly - Hanging the Fan (continued)

Making the electrical connections

Outlet box

in the ceiling RR

Green or Bare

Green

Black

White

Blue & Black

IMPORTANT: Use the plastic wire connectors (BB) supplied with

your fan. Secure the connectors with electrical tape and ensure

there are no loose strands or connections.

WARNING: Each wire not supplied with this fan is designed to

accept up to one 12-gauge house wire and two wires from the

fan. If you have larger than 12-gauge house wiring or more

than one house wire to connect to the fan wiring, consult an

electrician for the proper size wire nuts to use.

□ The fan comes with 54 in. lead wires for use with an extended

ball/downrod assembly. If using the 4.5 in. ball/downrod

assembly (B) provided, you can cut the lead wires to your

desired length (no shorter than 12 in.) This will make extra

room in the canopy (C), if you do not wish to cut the wires,

you will need to neatly wrap them.

□ Connect the fan motor green wires to the household green or

bare wire using a wire connecting nut (BB).

NOTE: The fan comes with 54 in. lead wires for use with an

extended ball/downrod assembly. If using the 4.5 in. ball/downrod

assembly (B) provided, you can cut the lead wires to your desired

length (no shorter than 12 in.).

WARNING: Remove the rubber motor stops on the bottom of the

fan before installing the blades or testing the motor.

□ Connect the fan motor white wire to the household white wire using a

wire connecting nut (BB).

□ Connect the fan motor black and blue wires to the household black

wire using a wire connecting nut (BB).

□ Secure each wire connecting nut using electrical tape.

□ Turn the wire connecting nut (BB) upward and push the wiring into the

outlet box (RR).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Hampton Bay 51564 Gebrauchs- und Pflegehandbuch Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Haushaltsfans Hampton Bay 51564